Education

How to Prepare for the Cisco 300-430 Exam

Spread the love

After passing the core exam (350-401)for CCNP Enterprise, you can select the technical area that you would like to pursue. There are six domains of focus offered by Cisco. They include SD‑WAN solutions, wireless networks, and routing & services, among others. Each of these areas is given through a specific concentration test. They are the following: 300-410, 300-415, 300-420, 300‑425, 300-430, and 300-435. This article will focus on Cisco 300-430. Read through to find out what topics are included in this exam so you can be able to prepare for it in an effective manner.

Cisco 300-430 Exam

What is Cisco 300-430 certification exam?

Cisco 300-430 ENWLSI is also referred to as Implementing Cisco Enterprise Wireless Networks.  It is a 90-minute exam that is related to the CCNP Enterprise certificate. It verifies the applicants’ knowledge and understanding of wireless network implementation, including multicast, QoS, FlexConnect, advanced location services, security for client connectivity, advanced location services, monitoring, and device hardening.

What are the main topics of Cisco 300-430 certification exam?

The objectives highlighted below are the general guidelines of theexam content that the students are likely to find in Cisco 300-430. Please note that besides these domains, the subjects from other related sections may also be included. These guidelines may also be changed at any time. To avoid wasting time studying all of them, it is advised to keep on checking for any changes regarding the test on the official website of the vendor. Without much ado, let’s look at the topics of Exam-Labs Cisco CCNP 300-430 ENWLSI ENSDWI 300-415 – ENSLD 300-420 – ENWLSD 300-425 Cisco certifications.

  • FlexConnect

Cisco 300-430 will check your general knowledge of FlexConnect, mainly how proficient you can go about deploying FlexConnect components, such as switching and operating modes, implementing Office Extend, and deploying FlexConnect capabilities. This section covers up to 15% of the entire exam. It will be your responsibility to deploy and accomplish Smart AP image upgrade, VLAN-based central switching, Flex ACL, FlexConnect groups and roaming, and split tunneling with fault tolerance.

  • Wireless Network

In this part, you are going to be tested on QoS on a wireless network. This domain covers about 10% of Cisco 300-430. The applicants are supposed to be able to implement QoS schemes based on the requirements,for example, implementing AVC, including Fastlane on WLC only, and implementing QoS for wireless clients visit https://www.certbolt.com/ .

  • Multicast

This is another section in Cisco 300-430 that covers about 10% of the exam content. The questions in this topic evaluate your knowledge of implementing multicast components, multicast direct, MDNS, and implementing multicast on WLAN. You can also come across the questions that will be testing how well you can be able to describe the effect of multicast on wireless networks.

  • Location Services

This topic area covers approximately 10% of Cisco 300-430. The questions are drawn from this objective typically gauge whether you have the knowledge and skills required to deploy CMX and MSE on a wireless network or not. Other questions will be testing your ability to implement location services based on your knowledge of client tracking, rogue APs, interferers, clients, and RFID tags (tracking only).

  • Advanced Location Services

This domain covers 10% of the whole content. Under this objective, you need to be able to implement CMX components. Here, you will be also evaluated on whether you can detect and locate CMX components or not. Your knowledge of presence services and analytics will be a plus. Moreover, the questions from this section will be checking your ability to troubleshoot CMX high availability, implement wIPS using MSE, as well as use Cisco Hyperlocation to troubleshoot location accuracy and implement a location-aware guest service by the use of Facebook Wi-Fi and a custom portal.

  • Wireless Security

Another topic that you will need to cover is security for wireless client connectivity, which covers 20% of the 300-430 certification exam.Under this subject, the candidates are tested on their ability to configure client profiling on ISE and WLC, implement identity-based networking on various wireless architectures (ACLs, QoS, VLANs), and implement AAA and 802.1x on SE and different wireless architectures. You also need to learn how to implement guest and BYOD, including certificate provisioning on the controller, native supplicant provisioning by the use of ISE, LWA using WLC or ISE, and CWA with ISE.

  • Monitoring

15% of Cisco 300-430 will be focusing on this objective. After learning this area, you must have the knowledge of utilizing reports on Cisco DNA center and PI and also have the relevant skills to manage RF interferers, including PI and WLC. Besides, you also need to have the knowledge of managing alarms and rogues (clients and APs) and troubleshooting clients’ connectivity, including Cisco DNA center, PI, ISE, and WLC.

  • Device Hardening

The remaining 10% of the exam content focuses on this topic area. Under this subject, the learners are usually tested on their ability to implement device access controls (including TACAS+ and RADIUS). You will also be evaluated on your knowledge of implementing CPU ACLS on a controller and whether you get the skills needed to implement access point authentication or not.

What study materials should you use to prepare for Cisco 300-430 certification exam?

Passing Cisco 300-430 is only possible if you have a grasp of the topics included in this test. One of the best ways to learn these objectives is by taking a training course, either online or by physically attending classes. The recommended course can be taken at Cisco Academy. It is available in three options:

  • Offline training with an instructor;
  • Virtual instructor-led course in a form of web-based classes;
  • Online self-paced learning.

All these variants will offer you a 5-day studying with lab practice. Besides that, you can also get some resources from the Cisco Learning Library.

You can also make use of study materials that are made available for the students on the PrepAway website. You can get a huge package of 60 practice questions with answers and use an exam simulator to evaluate your current level of knowledge and preparedness for this certification test.

Conclusion

As you can see, there are a lot of topics you have to cover. That is why we recommend that you start in advance and get all the study materials you need as soon as possible. Therefore, you will be able to manage your time and pass Cisco 300-430 with high results.